NEW

Grease for off-road motorcycle chains  
Grease for off-road motorcycle chains

Grease is visible under UV-light

Visual control of application - every chain will be treated!

For off-road motorcycle chains (cross & enduro)

  • Has a penetrating effect
  • Prolongs chain and sprocket lifetime
  • Resist to washing, protects from corrosion
  • Do not collect abrasive (sand, dust, etc.)
To product page
Oil for air filters  
Oil for air filters

Oil for motorcycle air filters. Designed to protect the engine from dust, sand and moisture. 

Has a viscous consistency and a saturated blue color.

To product page
RESURS MOTO for all types of motorcycle clutches  
RESURS MOTO for all types of motorcycle clutches

For engine repair without disassembling and protection of 4-stroke motorcycle engines (with wet and dry clutch).

Indications for use:

  • Oil burn
  • Increased fuel consumption
  • Engine noise
  • Reduced compression
To product page
Fluorescent grease for motorcycle chains  
Fluorescent grease for motorcycle chains

Grease  is visible only under UV
Visually control  the application - — and each link in the chain will be lubricated!

For road and sport bikes.

- penetrates in all types of seal fittings;
- stable at high driving speed
- increases chain and sprockets operation life;
- resists to water washout, protects from corrosion
- decreases chain noise.

To product page
«SILICOT SPRAY» for locks and hinges  
«SILICOT SPRAY» for locks and hinges

Spray lubricant for locks and hinges

Advantages:

  • Effective spray is designed for fast lubrication of all types of locks
  • Perfectly lubricates
  • Protects against corrosion
  • Does not affect on plastic and rubber parts of the castle
To product page
DIELECTRIC «SILICOT SPRAY»  
DIELECTRIC «SILICOT SPRAY»

Dielectric spray lubricant

Advantages:

  • Has high level of penetration
  • Enhances the reliability of electrical parts
  • Has hydrophobic properties
  • Protects against chemical corrosion
To product page
«SILICOT SPRAY» for rubber parts  
«SILICOT SPRAY» for rubber parts

Spray lubricant for rubber parts

Advantages:

  • Spray prevents freezing, drying and discoloration of rubber parts
  • Protects against aggressive influence of negative environmental factors
  • Gives lustre to rubber parts
To product page
Multipurpose spray lubricant «SILICOT SPRAY»  
Multipurpose spray lubricant «SILICOT SPRAY»

Volumetric action SILICOT SPRAY. Forms a mist of microdroplets of silicone lubricant and penetrating even the hard to reach places. Odourless kerosene, and solvents. Effectively lubricates lightly loaded friction pairs, prevents from rust, improves the dielectric properties. Universal.

To product page
iMagnet P14  
iMagnet P14

iMagnet P14- is the first HTHS viscosity engine oil stabilizer in the world.

iMagnet P14 has international novelty. This is the new age of engine oil additives. Application of only 5% of iMagnet P14 restores operational characteristics of modern oils and protects engine during all service interval. iMagnet P14 does not contain solid particles, it prolongs engine oil service life in conditions of low quality fuels and when oil producers saves on oil additives

Advantages:

  • iMagnet P14 components optimize oil film and work as clever oil magnets in friction zones of engine, protecting it.
  • Comparable to chip tuning which aims to increase power and reduce fuel consumption
  • iMagnet P14 does not contain solid particles, which can damage details of modern engines
To product page
Cutting gel VZHIK  
Cutting gel VZHIK

VZHIK is a cutting gel for metalworking

Grease is suitable for treatment of various steels, metals and alloys of increased hardness or that are difficult to process. Such as:

  • titanium
  • stainless steel
  • nonferrous metals

Extends tools and consumables life.

Economical, thin layer is enough to use.

Grease components are resistant to high temperatures.

To product page
Grease for fifth-wheel coupling  
Grease for fifth-wheel coupling

APPLICATION:

Do not remove the grease from the packaging. Put two packages on different sides of hitch. During lowering of the hitch with packages will squash and grease will spread across the friction surface. Excessive grease will be removed with cloth.

Classification by DIN 51 502/DIN 51825 KP2K-40

Classification by ISO 6743-9 ISO-L-XDCIB 2

Working temperature: from -40°С to +120°С

Shelf life 5 years

To product page
 

Subscribe

VMPAUTO useful materials