Grinding paste “Classic”   

Grinding paste “Classic”

For valves of petrol engines

Purpose: for grinding, finishing and consolidation of valves

- comfortable batcher form lets easy and equally apply paste on the valve
- rough and finishing composition in one tube
- contains components accelerating time of lapping
- paste remains in contact zone.

ID: 3401
ID: 3403
ID: 3404

How it works

Grinding is a process of removing of the thinnest layers with small grain size abrasive powder merged in lubricant by the use of special instrument.

During this treatment the paste removes all roughness.

The paste provides

  • 90% hermeticity of the valves
  • Use FABO (ANF) paste to achieve 100% hermeticity
  • Improvement of the performance
  • Increasing of compression in the combustion chamber
  • Reducing of the oil burning

Paste contains abrasive powder F180 with average grain size 60 mkm


  • comfortable batcher form allows easy and equally apply paste on the valve;
  • rough and finishing composition;
  • contains components accelerating time of lapping;
  • paste retention in contact zone

How to use:

  1. Put the valve into the head of the box
  2. Apply a thin layer of the paste
  3. Fix the valve stem
  4. Turn the valve two-ways pressing the valve to the valve seat
  5. Homogeneous mat grey colour of the valve face and seat means well grinding
  6. After grinding wipe the valve and the seat with a clean rag and wash to remove the rest of the grinding paste.

Find nearest distributor in your country:

VMPAUTO Distributors network

Or find our products in Web Shops:

Export department

(812) 601-05-53 доб.153



VMPAUTO useful materials