Solid grease MC 2000Solid grease MC 2000   

Solid grease MC 2000

Solid grease MC 2000 is a wear-resistant coating.

It is applied on pistons and crankshafts of locomotives, vehicles, cars, trucks, and other machines.

ADVANTAGES

  • Has high antiwear and antifriction properties
  • Ensures fuel saving
  • Ensures additional sealing piston cylinder wall
ID: 1701
ID: 1702
Package



How it works

MC-2000 is a wear-resistant coating.

It is applied on pistons and crankshafts of locomotives, vehicles, cars, trucks, and other machines.

Under overheating a piston covered with МС-2000 works 5 times more, and friction reduces in 2 times.

Thickeness of a one grease layer is 12-14 mkm.

Quantity of layers: 1-2 for new pistons, 3-4 for repair pistons.

Grease consumption: 1.25g per 1 piston (1 layer).

One package is enough for treatment of 2 LADA piston kits.

Composition: the basis of the grease MC-2000 is molybdenum disulfide, carrier is polymer of high temperature rejection.

Before treatment degrease the surface of the piston with 646-m solvent. If you use a pulverizer it is recommended to dilute MC-2000 with isopropyl spirit.

PROPERTIES МС-2000

  • Decreases wear and friction up to 50%
  • Protects engine from overheating
  • Prevents scratches and scores.

Solid greases MC-2000 have different heat resistance and work under following temperatures:

  • MC-2000 up to +200°С
  • МС-2200 up to + 240 °С
  • МС-2300 up to + 300 °С

ANALOGUES:

  • Molykote D10
  • VAP-2
  • ASZP-1 (USA)

DESTINATION:

APPLICATION METHODS

Before working piston solvent degrease

1. Application with a pulverizer:

For pistons of diesel engines it is
recommended to make 7 - 10 mkm layer.
Dilute МС-2000 with isopropyl spirit.
For protection: 1 - 2 layers;
For reparation: 2 - 3 layers.

2. Application with a brush:

layer thickeness 10 - 15 mkm;
For protection: 1 - 2 layers;
For reparation: 2 - 3 layers.

3. Application with a tampon:
(the easiest way to apply MC-2000)

7 - 15 mkm covering is applied on piston cup.

4. Stencilled application:
(It is used in mass production)

Apply 1 layer of 5 - 10 mkm. Piston grooves and holes for piston flange should be covered with a stencil.

After application dry every layer under 25 °С during 20 minutes.

Final drying is made under following temperature:

25 °С - 24 hours;
150 °С - 2 hours;
170 °С - 1 hour.

 

Find nearest distributor in your country:

VMPAUTO Distributors network



Or find our products in Web Shops:




Export department

(812) 601-05-53 доб.153

export@vmpauto.com

 

Subscribe

VMPAUTO useful materials