Grease for brake system "MC 1600"Grease for brake system "MC 1600"Grease for brake system "MC 1600"Grease for brake system "MC 1600"   

Grease for brake system "MC 1600"

MAIN PROPERTIES

  • Temperature range  from -50°C to +1000°C
  • Minimum application temperature in ACLS, °C  more than +250°C
  • Penetration at - 40 °C, 1/10 mm  200
  • NLGI consistency grade  2/3

MAIN ADVANTAGES

  • High thermo-oxidative stability
  • Water-resistant
  • Prevents surfaces from welding
  • High adhesion to metal surfaces
  • Almost neutral to rubber boots

SUBSTITUTE GREASES:

  • Castrol BNS-grease
  • Fuchs GLEITMO 165
  • Huskеy 220-R Silicone Disc Brake Caliper Grease and Noise Suppressor
ID: 1502
ID: 1503
ID: 1505
ID: 1507
Package



Use MC 1600 every time you replace the brake pads

ADVANTAGES

  • Anticorrosion properties;
  • Operating temperature from -50°С up to +1000°С;
  • Protects from jamming;
  • Saves the rubber bands from deformation;
  • Low ability to washout;
  • Protects caliper from salt and slush;
  • Compatible with brake fluid DOT 3, DOT 4, DOT 5.1

MC 1600 is used in:

  • Caliper guide pins
  • Back sides and edges of brake pads
  • Caliper piston

APPLICATION

Apply a thin layer of grease on all caliper parts. For easy apply on piston use a syringe.

CONSUMPTION

One sachet of МС 1600 is enough for one brake pads kit.

RECOMMENDATIONS

  • Clean all surfaces of caliper parts from dirt and rust before application
  • Check the brake pads for damage and replace them if needed
  • Apply a thin layer of grease on all surfaces according to manufacturer instruction
  • Use MC 1600 every time your replace brake pads

Video

Safe braking with MC-1600

MC 1600 - water test.

Find nearest distributor in your country:

VMPAUTO Distributors network



Or find our products in Web Shops:

Related articles

Related news

Related products

Set of greases Bremz  
Set of greases Bremz

A set of greases for brake system - the quality of the German components.

Grease for non-working surfaces of the pads and staples

Silicone high-temperature grease. Anti-squeaky, non-stick, anti-corrosion lubricant for seats, non-working surfaces and brake pad ends.

Operating temperature range: from -50 ° С to + 1000 ° С

Piston Surface Grease

Synthetic lubricant based on PAG, sealing. Safe for rubber cuffs. It is not washed away by brake fluid. Compatible with brake fluids DOT 3, DOT 4, DOT 5, DOT 5.1

Operating temperature range: from -40 ° С to + 200 ° С

Grease for guide pins

Synthetic polyalkylene glycol grease with Li-Complex thickener. Antiwear, anti-corrosion, high-adhesion, high-temperature lubricant for long-acting guides closed type. Resistant to dirt and reagents.

Operating temperature range: from -40 ° С to + 200 ° С

To product page
CV-joint grease  
CV-joint grease

CV-joint grease  - is an anti-burr metal plating grease based on lithium complex.

MAIN PROPERTIES

  • Temperature range  from -40°C to +140°C
  • Minimum application temperature in ACLS, °C  -15°C
  • Base oil kinematic viscosity at 40 °С, cSt  60-80
  • NLGI consistency grade  2/3

MAIN ADVANTAGES

  • High wear resistance
  • High thermo-oxidative stability
  • Extends life cycle of friction units
  • Does not affect protective boots material
  • Protects a joint from moisture and dust

SUBSTITUTE GREASES:

  • ENI-AGIP Grease SM
  • Castrol EPL2, Castrol MGX, Castrol MS 3
  • Mobilgrease-special
  • Shell ALVANIA 1015
  • Statoil MolyWay Li 752
  • LUKOIL POLYFLEX EP 160 HD-2, LUKOIL SHRUS-4
  • Huskеy PREMIUM MOLY CV JOINT GREASE
To product page
Anti-squeal brake grease MC 1620  
Anti-squeal brake grease MC 1620

Brake Anti-Squeal Grease for nonworking surfaces of pads

Special synthetic material for brake systems.
Should be used to prevent brake squeal.

  • Eliminates brake squeal
  • Prevents from uneven wearing of brake pads and brake discs
  • Provides movability to caliper parts
  • Increases the efficiency and safety braking
  • Extremely adherent and resistant to road salt and splash water
  • Working temperature up to +800C
To product page
GREASE FOR CALIPER SLIDE PINS MC-1630  
GREASE FOR CALIPER SLIDE PINS MC-1630

Brake grease for caliper guide pins, including caliper rubber parts

  • Working temperature from -50°С up to +200°С
  • Prevents from jamming and deformation of rubber parts
  • Prevents from uneven wearing of brake pads and brake discs
  • Reduces stopping distance
  • Do not influence on rubber parts, prolongs its service life
To product page
 

Subscribe

VMPAUTO useful materials